How to reset the maintenance light on a Vauxhall Combo Life?

I recently changed the oil on my Vauxhall Combo Life and now the maintenance light is on. How can I reset it?

To reset the maintenance light on your Vauxhall Combo Life, follow these steps: 1. Turn on the ignition but do not start the engine. 2. Press and hold down the brake and accelerator pedals at the same time. 3. While holding down the two pedals, press and hold the trip button. 4. Wait until the maintenance light begins flashing, then release all three pedals. 5. Press and release the trip button until the maintenance light stops flashing. 6. Turn off the ignition and start the engine. The maintenance light should now be reset. If it doesn't turn off, repeat the steps again.

One possible reason for your maintenance light staying on could be that the oil change was not done properly. Make sure to check the oil level and top up if necessary. If the light still doesn't turn off, you may need to take your Vauxhall Combo Life to a mechanic for further diagnosis.

Another possible solution to reset the maintenance light on your Vauxhall Combo Life is to disconnect the negative terminal of the battery for a few minutes. This will reset the car's computer and the light should turn off once you reconnect the battery.